V12F
Release time：2020-11-06 00:00:31
 |
Technical data: l Design：3.5-way vented-box l Frequency Response：22Hz-40kHz l Sensitivity (2.83V/1m)：88dB l Impedance：8 ohms(minimum 6.4 ohms) l Power Requirement：50-250W recommended l Tweeter：Model：APR1.0. Sandwich aluminum ribbon tweeter, the size of aluminum ribbon(LWT): 150mm×14.5mm×0.015mm. High power handling, shielded design, easily field-replaceable for the ribbon. l Rear Firing Tweeter：Model: G2Si. G2Si. Purified aluminum ribbon tweeter, the size of aluminum ribbon (LWT):60mm×8.5mm×0.01mm. High power handling, high output, shielded design, easily field-replaceable for the ribbon. l Midrange：Model：AC165/DC50SC-Y25-0604A, 1×165mm (6.5″). Aluminum frame, the sandwich cone of Non-woven carbon fiber+Cell+Non-woven carbon fiber, 50mm (2″) copper clad aluminum voice coil with flat wire, the special magnet system with Faraday ring and demodulation coil, 120mm×20mm Y25 Ferrite magnet. l Woofer：Model：AC300/DC75C2C-1204A1, 1×300mm (12″). Aluminum frame, the sandwich cone of Non-woven carbon fiber+Cell+Non-woven carbon fiber, 75mm (3″) copper clad aluminum voice coil with flat wire, the special magnet system with Faraday ring and demodulation coil, 170mm×22mm Y30 Ferrite magnet. l Crossover Frequency：170Hz, 1.5kHz and 9kHz l Crossover’s Attenuation Slope：Woofer -12dB，Midrange：-12dB，Tweeter -18dB， Rear firing tweeter -12dB. l Crossover Components：M-cap Supreme MKP capacitors are used for crossover of tweeter, M-cap MKP capacitors are used for crossover of midrange, and Aurum Cantus MKP capacitors are used for crossover of woofer. Also, a zero ohm inductor and the metal oxide film resistors with military industrial standard. l Connective Cable：Teflon insulated OCC cable l Damping Material：Wool, polyester fiber and the PU foam l Connections：4 pcs 18mm gold-plated copper connector, Bi-wiring. l Cabinet Material：High quality MDF l Finish：The standard finish is Rosewood PE high gloss paint. Furthermore, there are also Figured maple PE high gloss paint, Cherry PE high gloss paint and the Black PE high gloss paint for options. l Dimensions (HWD)：1115mm×398mm×557mm(43.90″×15.7″×21.9″). l Net Weight：75kgs/pc (165lb/pc) |
| Finish options for V12F： | |
    |
 downloadOWNER'S MANUAL:(V12F) -139k REVIEWS: |